{"product_id":"zestek-racing-scx-pro-steering-wheel-control-panel-standalone-ecu-only","title":"Zestek Racing SCX Pro Steering Wheel Control Panel (Standalone ECU Only)","description":"\u003cp\u003eThe Zestek Racing SCX Pro Steering Wheel Control Panel (Standalone ECU Only) is designed for dedicated race cars running a standalone ECU, with no factory steering wheel functions to retain. It doesn't use the clock spring or a vehicle-specific harness – instead it wires directly into your ECU, CAN network, dash or logger.\u003c\/p\u003e\u003cp\u003eIts rear PCB provides two 0-5V analogue outputs and four low-side auxiliary outputs alongside 12V power and CAN High\/Low, so a button on the wheel can switch a relay, fire a solenoid or drive an analogue input on your ECU or logger rather than simply sending a keypress. Haltech mode emulates a Haltech CAN keypad, while Custom Open CAN lets you build your own data streams for Emtron, MoTeC, Link, FuelTech and other standalone ECUs, all configured in Zestek Workstation over USB-C.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear PCB I\/O: 12V power and ground, CAN High and CAN Low, 2 x 0-5V analogue outputs, 4 x low-side auxiliary outputs\u003c\/li\u003e\n\u003cli\u003eOpen CAN: up to four outgoing streams, with ID, stream size, bit rate and transmit speed all user-defined\u003c\/li\u003e\n\u003cli\u003eButton behaviour: tap or lock per button, with button light and indicator light controlled independently\u003c\/li\u003e\n\u003cli\u003eConstruction: dry-compressed carbon fibre faceplate with a metal rear housing\u003c\/li\u003e\n\u003cli\u003eButtons: multi-stage tactile design with 2.25mm of travel\u003c\/li\u003e\n\u003cli\u003eQuick release: Gen 2 pogo-pin type in 7075 forged aluminium, with integrated adaptor\u003c\/li\u003e\n\u003cli\u003eSoftware: Zestek Workstation (Windows or macOS), connected via USB-C\u003c\/li\u003e\n\u003cli\u003eWireless expansion: VeloLink, supporting up to six auto-pairing modules\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWires straight into a standalone ECU, CAN network, dash or logger – no clock spring or vehicle harness required\u003c\/li\u003e\n\u003cli\u003eHaltech CAN keypad emulation (functions assigned in Haltech ECU software), or Custom Open CAN for Emtron, MoTeC, Link, FuelTech and other standalone ECUs\u003c\/li\u003e\n\u003cli\u003eBuilt-in CAN-bus analyser, plus a function test for every button, rotary and paddle before the panel is wired into the loom\u003c\/li\u003e\n\u003cli\u003eProgrammable RPM shift lights with their own brightness boost for daylight visibility\u003c\/li\u003e\n\u003cli\u003eRGB button and status lighting, with brightness adjustable on the panel without a laptop or driven from a CAN stream\u003c\/li\u003e\n\u003cli\u003eConfigurations can be exported and imported, so a set-up can move to another car or go straight to your tuner\u003c\/li\u003e\n\u003cli\u003eGen 2 two-way adjustable magnetic paddle shifters with a wider adjustment range and a more positive shift\u003c\/li\u003e\n\u003cli\u003eThe Gen 2 pogo-pin quick release carries the electrical connection across the removable wheel, so no curly cord is needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the Kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x SCX Pro control panel\u003c\/li\u003e\n\u003cli\u003e4 x Zestek anodised gold knobs\u003c\/li\u003e\n\u003cli\u003e2 x Zestek Gen 2 two-way adjustable magnetic paddle shifters\u003c\/li\u003e\n\u003cli\u003e6 x countersunk M5 x 10mm grade 12.9 screws\u003c\/li\u003e\n\u003cli\u003e1 x Zestek Gen 2 quick release kit\u003c\/li\u003e\n\u003cli\u003e1 x USB-C to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 x button sticker set\u003c\/li\u003e\n\u003cli\u003e1 x 10-pin connector\u003c\/li\u003e\n\u003cli\u003e1 x SCX Pro CAN signal PCB\u003c\/li\u003e\n\u003cli\u003e1 x 55.8mm steering wheel centre cap\u003c\/li\u003e\n\u003cli\u003e2 x 55.8mm centre cap spacers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e A boss kit and an aftermarket steering wheel are required and are sold separately. The motorsport curly cord shown in the photos is optional and sold separately, as is the VeloSwitch. This version is not intended for cars running their OEM ECU where you want to keep the factory steering wheel controls. Please confirm the CAN mapping, connector pinout and output load ratings for your build, and match the message IDs and data fields to the receiving ECU or device. Any VeloSwitch and every load connected to it must be installed within their electrical ratings. Most aftermarket steering wheels suit the SCX Pro – if you're unsure about yours, please ask us before ordering. Zestek states this product is for off-road and motorsport use only.\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDedicated race cars running a standalone ECU with no factory steering wheel functions to keep\u003c\/li\u003e\n\u003cli\u003eHaltech ECUs, via Haltech CAN keypad emulation\u003c\/li\u003e\n\u003cli\u003eEmtron, MoTeC, Link, FuelTech and other standalone ECUs, via Custom Open CAN\u003c\/li\u003e\n\u003cli\u003eMost aftermarket steering wheels\u003c\/li\u003e\n\u003cli\u003eNot suitable for: cars still running their OEM ECU where the factory steering wheel controls are to be retained – these need the Zestek Racing SCX Pro OEM Steering Wheel Control Panel for your car, or the Zestek Racing SCX Steering Wheel Control Panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eAs the SCX Pro is wired into a race loom, we strongly recommend fitting by a professional installer or auto electrician. Incorrect installation may void the warranty. Run the Workstation function test across every button, rotary and paddle before wiring, then terminate the rear PCB to suit the car. Zestek also offers a remote Express set-up session to guide you through configuration.\u003c\/p\u003e\u003cp\u003eFurther upgrades include the Zestek SCX Pro Motorsport Curly Cord, sheathed in Raychem DR-25 with an aerospace-grade connector, for builds needing a separate cable connection; the Zestek VeloSwitch, adding eight wireless relay channels; and, on supported vehicles, the Zestek VeloBCM and VeloLCM Control Module Bundle for body, lighting and wiper control.\u003c\/p\u003e","brand":"Zestek","offers":[{"title":"Default Title","offer_id":55718961217912,"sku":"ZTR-SCX-PRO1","price":1399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4670\/3651\/files\/zestek-racing-scx-pro-steering-wheel-control-panel-standalone-ecu-only-4616047.jpg?v=1794530918","url":"https:\/\/www.evolveautomotive.co.uk\/de\/products\/zestek-racing-scx-pro-steering-wheel-control-panel-standalone-ecu-only","provider":"Evolve Automotive","version":"1.0","type":"link"}